Activating your Software

Getting your software to work is a 3 stage process, first you will Install it, then Register yourself as a user and then Activate the software against your name and email.

 

Step 1: Installing


 

If the software is not already on the computer, install it from the downloaded file.

 

Now start the application from the icon on the desktop.

 

 

TW4 logo

 

Exclaimation

You will have probably downloaded the installation from from a link sent to you by Siliconcoach.  You must double click on this downloaded installer file to actually install the software.

 

Exclaimation

The first time you install Timewarp 4 on a computer it will be in Demo mode.  This will give you 30 days of fully functioning software before it must be activated.

 

Step 2: Registering


 

Make sure you are connected to the Internet (test by going to www.google.com ).

You must enter your first and last name and also a valid email*.

Press the NEXT button to register

*NOTE: It is critical that this is a valid email as you will be asked to supply it to Siliconcoach and it will then be used as your software release code.

You cannot change the email.

Now you will have access to the 30 day trial.

 

 

 

Registration-data

 

Exclaimation

The first time you run the software after registering on a computer it will be in Trial mode.  This will give you 30 days of fully functioning software before it must be activated.

 

Step 3: Activating


 

Eventually you will have no days left on your trial so you now need to Activate the software before you can continue to use it.

 

 

 

 

 

 

Trial days left

 

 

As long as you have sent Siliconcoach your payment, your first and last name and a valid email, and they have accepted it, then you just need to press the Activate button.

The software will check your authorization on our web server and if it is cleared your software will be ready to use.

 

Successful Activation

 

Frequently Asked Questions about your License

hmtoggle_plus1What happens if sell my PC without first returning my license to Siliconcoach?

If you fail to return your license to Siliconcoach so you can use it again on another PC then you will need to purchase a new license.  Contact support@siliconcoach.com  before selling your computer.

 

hmtoggle_plus1What happens if my PC is stolen?

The expectation is that your insurance will cover the replacement cost and you will purchase the software again. Upon notification of loss, we will block your old activation and issue a new one when you purchase again.

 

hmtoggle_plus1What happens if my Hard Drive crashes?

In the case that your hard drive cannot be recovered by simple reformatting and the disk has to be replaced then you will need to provide Siliconcoach with proof of purchase for the replacement drive and we reserve the right to ask you to run diagnostic software on the PC to confirm that the drive matches that as specified in the receipt

 

hmtoggle_plus1Can I move my license between computers?

Not at this time.  We are using a new registration system and it does not allow the user to move the license themselves.  If you need to move you license you will need to contact support@siliconcoach.com.

 

hmtoggle_plus1What if I use Ghost or similar to image my PC and end up wiping my license because of a low level format?

If you choose to image your PC then you must contact sup[port@siliconcaoch.com before doing so. Activation is very fast and simple once you've completed it once. Failure to return your license to Siliconcoach may result in you having to purchase a new license.